A door that's jumped its track can jam mid-cycle or hang at a dangerous angle. We realign or replace the damaged track section and check what knocked it loose in the first place.
We check whether a bent track, worn rollers, or a loose bracket caused the derailment, not just push the door back on.
We don't eyeball alignment. Plumb and level get checked and confirmed before the job is done.
Track that's visibly bent or dented from impact gets replaced rather than hammered back into shape.
Vehicle impacts often bend both the track and the bracket mounting it to the frame. We check both.
Each service below is handled by a technician trained specifically for this kind of repair, not a generalist guessing at it.
Track sections are checked for plumb and level, then adjusted and secured to the frame at the correct tolerance.
Visibly bent or dented track sections get swapped for new standard sections rather than bent back into shape.
A roller jumping the track repeatedly usually means the rollers themselves need replacing along with the fix.
Collision damage often affects more than the visible dent. We check the full track and frame mounting system.
A track can only stay aligned if the brackets holding it are solid. We check and correct this on every off-track call.
Describing the symptom helps us bring the right track sections and hardware on the first trip.
Technicians carry standard track sections and mounting hardware for common configurations.
We check the track, rollers, and brackets together to find the root cause before quoting the fix.
Track realigned or replaced, verified plumb, and tested through a full cycle before we leave.
“Backed the truck into the door and bent the track pretty badly. Replaced the section and it runs like new.”
“Track was off plumb by more than it looked. Fixed properly instead of a quick patch.”
“Storm debris jammed the track and bent it. Same-day repair got the door working again before dinner.”
A combination of a worn roller and slightly bent track is one of the most common causes we see.
We don't recommend it. Forcing a door back on the track can cause further damage or personal injury.
A section that's been bent once tends to weaken with repeated stress, so replacement is often the better call.
A straightforward realignment costs less than a section replacement, and we'll confirm which applies before starting.
It's best to leave the door as-is and call for repair rather than risk worsening the damage.
Most off-track repairs are completed same-day, typically within one to two hours on-site.
Call now for a real appointment window, not a callback promise.
☎ Call +1-831-293-1591Our Felton coverage spans the full city and the zips around it, so a same-day window is realistic almost anywhere nearby.
Embedded Map Placeholder for Felton, CA